Oceanic DataTrans Plus, Owner'S Manual

Page: 48 / 140

36
®
Un it s of Measu r e pr ocedu r e, or t o r et u r n t o t h e Su r face Mode pr ess t h e Ad-
van ce/Left bu t t on 4 t im es.
S e t U n it s o f Me a su re
You can ch oose bet ween Im per ial (P SI an d F eet ) an d Met r ic (BAR an d Met er s)
u n it s of m easu r e. You r u n it h as been fact or y set for F T an d P SI. To ch an ge t o
m et r ic u n it s of m easu r e, follow t h is pr ocedu r e, begin n in g wit h st ep 1 if in t h e
Su r face Mode, or begin n in g wit h st ep 4 if you ju st set t h e Alt er n at e Display:
1. P r ess t h e Advan ce/Left bu t t on 5 t im es t o advan ce t o t h e Set Mode.
2. P r ess t h e Select /Righ t bu t t on t o select t h e Set Mode.
3. P r ess t h e Advan ce/Left bu t t on 4 t im es t o advan ce t o t h e Un it set t in g.
SE T:UNIT will appear , wit h UNIT flash in g (F ig. 38).
4. P r ess t h e Select /Righ t bu t t on t o select t h e Un it set t in g. P SI an d F T will
appear , flash in g (F ig. 39).
5. P r ess t h e Advan ce/Left bu t t on t o t oggle bet ween Im per ial an d Met r ic
u n it s, an d pr ess t h e Select /Righ t bu t t on t o accept t h e on e displayed.
Aft er t h e Un it s h ave been set , SE T:ALRM will appear wit h ALRM flash in g.
To set t h e alar m valu es con t in u e wit h st ep 4 of t h e Set Gas an d Dept h Alar m
pr ocedu r e begin n in g on page 40, or t o r et u r n t o t h e Su r face Mode pr ess t h e
Advan ce/Left bu t t on 3 t im es.
®
DECO
C.Z. C.Z.
PSI FT
O2
NO DECO
0 5 10 20 30 40 50 60
F ig. 39 - Un it s
F ig. 38 - Set Un it s
®
0
5 10 20 30 40 50 60
R2