Oceanic DataMax Sport, Owner'S Manual

Page: 22 / 76

18
Dive. Above water, you will view the Pre Dive Planning Sequence, Surface,
and Time to Fly Modes. Become familiar with all ten modes so that you
understand exactly what the DataMax Sport is telling you.
INFORMATIONAL DISPLAYS
Each DataMax Sport numeric or graphic display represents a unique
piece of information. The following section describes each display in detail.
Depth Display
The lowermost portion of the LCD (Fig. 16b) contains the Depth displays.
Depending on the mode that is active, you may see Depth or Maximum Depth
displayed in this area. These displays indicate depth from 0 to 249 feet in one
foot increments (or 0 to 76 meters in .5 meter increments for the metric
version).
Time Display
The top of the LCD (Fig. 16a) contains Dive Number and the Time
displays. Time displays may represent NDC or Decompression Dive Time
Remaining, Bottom, or Surface Times. The various time displays are shown
in hour:minute format (i.e. 1:06, one hour and six minutes not 106 min-
utes!). The colon that separates hours and minutes blinks once per second
only when the display is in “real time.” Elapsed Surface Time and Bottom
Time are real time displays. Dive Time Remaining is a calculated projection
of time and uses a solid (non-blinking) colon. This helps you tell the different
time displays apart.
MAX
FT
M
BATT
LOW
SURFACE BOTTOM
LOG
NDC
PLAN
DEC
DataMax
SPORT
®
®
TIME
DEPTH
b.
a.
Fig. 16 – Display layout