75
Datamax Pro Plus
• Closely examine the inside of the battery compartment for any signs of
corrosion indicating entrance of moisture into the unit. If found, return
your Pro Plus to an Authorized Oceanic Dealer, and DO NOT use it until
it has received service.
If water or corrosion is found in the battery compartment, DO NOT use it un-
til it has received proper service. It is best to have your unit inspected and
cleaned by an Authorized Oceanic Dealer. If you are cleaning the unit -
• Inspect the lens and case to ensure they are not cracked or damaged.
• Discard the battery and DO NOT attempt to reuse it.
• Check the o-ring seating surfaces for damage (nicks, cuts, divots, etc.).
• Flush the battery hatch and compartment with a solution of 50% white
vinegar and 50% water. Rinse with fresh water, and allow to air dry over-
night or blow dry with a hair dryer set at no heat.
BATTERY INSTALLATION
• To replace the battery hatch o-ring, lightly lubricate it with silicon grease
and place it on the beveled outer edge of the battery compartment (Fig.
79). Ensure that it is evenly seated.
NOTE: This o-ring must be a genuine Oceanic part that can be
purchased from your Authorized Oceanic Dealer. Use of any
other o-ring will void the Pro Plus warranty.
Fig. 79 - O-ring Installation
+
O-ring
Battery
Cavity
POS
NEG
R1
