MAINTENANCE
1.
The acrylic of your new bathtub has a glossy finish. In order to preserve this finish, never use abrasive
cleaners containing scouring powder (ex. Ajax, Vim, etc), steel wool, acetone (nail polish remover), dry
cleaning fluid, window-cleaning products, and ammonia compound, paint thinner, mineral or benzene
oil on the acrylic surface, the jets and the handles of your bath.
2.
Clean your bath once a week using a soft sponge or cloth with a liquid detergent (ex. Fantastik Original,
Hertel, Simple Green, Greased Lightning, Mr Clean, etc.) and warm water. Make sure the product is
recommended for use on acrylic by the manufacturer (see product label).
3.
Remove grease, oil, paint or ink stains using isopropyl alcohol. Rinse well and dry using a soft, clean
cloth.
4.
Mineral deposits and soap films can develop on your bathtub accessories. Regular cleaning is
recommended, using mild liquid soap and, if needed, a Teflon scrubbing pad.
5.
For small scratches or deeper scratches, and/or any other considerable break, please contact us for
advice on how to proceed and/or an acrylic repair specialist referral.
Head Office:
591, avenue des Entreprises
Thetford Mines (Québec)
Canada G6H 4B2
Toll Free
1 877-332-4224
Fax
1 866-460-4334
6/16/21
