4) Input Selectors & Legends
The Pro2A is factory pre-set to Analog Input. Just plug in your source and start enjoying the rich
sound quality
– nothing more to do!
Operation: There
are four presets stored in the speaker’s memory. The four LEDs give you an indication of
which preset and input are active. To scroll through the options, make short
(1/2 second or less
)
successive pushes of the
‘LED selector.’ Once you have decided on a preset, make a push long enough
to
see a change of state (i.e. flashing LEDs now stay solidly lit or turn off completely).
Inputs are clearly marked and are selected utilizing the momentary pushbutton labelled
–
‘LED Selector’ on the right top corner of the panel. The legend printed below indicates which
Preset is active via the illuminated vertical LED display. Each short push of the button will cycle through to
the next factory preset. LED3 and LED4 will illuminate or extinguish per the legend.
