manualshive.com logo in svg

Ocean Technology Systems Guardian, Owner'S Manual

Share
Download
Ocean Technology Systems Guardian Owner'S Manual Download Page 2

i

- NOTICE -

This manual and the information contained herein are provided for use as 
a maintenance and operation guide. No license or rights to manufacture, 
produce, and/or sell either the manual or articles described herein are given. 
Undersea Systems International, Inc., dba Ocean Technology Systems 

hereinafter referred to as OTS, reserves the right to change specifications 

without notice. We recommend that all users read and fully understand this 
manual before using a Guardian full-face mask (GFFM).

All statements, technical information, and recommendations herein are 
based on tests we believe to be reliable, but the accuracy or completeness 
thereof is not guaranteed; and the following is made in lieu of all warranties, 
expressed or implied, including the implied warranties of merchantability 

and fitness for purpose: Seller’s and Manufacturer’s only obligation shall 

be to replace such quantity of the product proved to be defective. Before 
using, the user shall determine the suitability of the product for intended 
use, and the user assumes all risk and liability whatsoever in connection 
therewith. Neither Seller nor Manufacturer shall be liable either in tort or 
in contract for any loss or damage—direct, incidental, or consequential—
arising from the use of or the inability to use the product. No statement or 
recommendation not contained herein shall have any force or effect unless 

it is in an agreement signed by officers of the Seller and Manufacturer.

- IMPORTANT SAFETY NOTICE -

(Please read before using product)

It is absolutely essential that all divers are certified divers in good 

standing, properly trained, equipped, and fully understand this user’s 

manual before attempting to use the Guardian FFM. While the Guardian 

does provide the diver with outstanding underwater environmental 

protection, 

it does not change or eliminate the potential hazards of 

diving!

Refer to the Library page of our Web site, www.otscomm.com for a list of 

any changes made to this manual since its publication.

© Copyright 2009, 2010, 2014 by Undersea Systems International, Inc., dba

Ocean Technology Systems

. All rights reserved.

Specifications are subject to change without prior notice.

506129-000 (F)

Summary of Contents for Guardian





























Reviews:

No comments

Brands by name

Popular brands

Load more brands