2017517
MOB1 Ocean Signal
http://oceansignal.com/products/mob1/
4/4
SPECIFICATIONS
How to programme DSC MMSI number into the MOB1
A video showing the programming sequence for the MOB1 can be
found at this link (http://oceansignal.com/wordpress/wp
content/uploads/MOB1 Configuration.mp4).. Remember to set the
display brightness to full before starting the sequence.
Note that the test key is being pressed directly and then the rubber
adaptor fitted when the MOB is ready to programme.
Can I cange the DSC MMSI number is I move to a different
vessel?
Yes, it is possible to reprogram the MMSI number used to call your
DSC radio as many times as you like using the normal applications.
There is no need to delete the old number first. The new number will
simply overwrite the old MMSI number.
Each time you programme the MOB1 it will use a small amount of the
battery capacity and reduce the operating lifetime by a few minutes
each time.
AIS transmission Transmit Power
1Watt
Frequency
161.975/162.025MHz
DSC Transmission Transmit Power
0.5Watt
Frequency
156.525MHz
Messages
Individual Distress Relay Distress Alert (by single call made on press of the activation button)
Temperature range (operational)
20°C +55°C
Temperature range (storage)
30°C +70°C
Waterproof
10m depth
Weight
92 grams
Standards
RTCM SC11901, EN303 0981
MANUALS
