Ocean Rodeo Go Joe Manual Download Page 3

• Get instruction specific to the type of kite power craft. 
• Obtain first aid training and carry first aid and safety/

rescue devices. 

• Consult your physician prior to beginning kite powered 

sports training. 

• Always wear a nationally approved personal floatation 

device when using a kite on water. 

• Always wear a helmet. 
• Dress appropriately for weather conditions; cold water 

and/or cold weather can result in hypothermia. 

• Check your equipment prior to each use for signs of 

wear or failure. 

• Never kite alone. 
• Do not kite in overpowered, gusty wind conditions. 
• Do not kite in offshore wind conditions. 
• Before launching from an unfamiliar site be aware 

of any dangers (rocks, reefs, currents, changeable 
weather, etc). 

• Scout unfamiliar sites before launching. 
• Never launch from an area with any obstacles closer 

than 2 line lengths downwind (people, rocks, etc). 

• Do not kite near power lines! 
• Do not ask a non-kiter to assist in the launching or 

landing of a kite. 

• Always use the kite with a functioning safety system. 
• Always prevent kites from inadvertently launching on 

land by weighting with sand, gravel, etc. 

• Always announce when you are going to launch your 

kite so people can be prepared to move in the event of 
a gust or a problem. 

• Disable an unattended kite by: removing the lines; 

placing the kite leading edge down, facing the wind; 
and weighting with sand, gravel, etc. 

• Do not exceed your kiting ability. Be honest with 

yourself. 

• You must not use alcohol or mind altering drugs prior 

to using this product.

CAUTION SAFETY WARNING 

KITE POWERED SPORTS CAN BE VERY DANGEROUS AND PHYSICALLY 

DEMANDING. THE USER OF THIS PRODUCT SHOULD UNDERSTAND THAT PARTICIPATING IN KITE POWERED SPORTS MAY 
INVOLVE SERIOUS INJURY OR DEATH AND AGREES TO OBSERVE THE FOLLOWING SAFETY PRECAUTIONS: 

Summary of Contents for Go Joe









Reviews: