NEPTUNE SPACE IRON MASK Owner’s Manual rel. 1.0
October 2010
6
DO NOT
leave a cylinder standing unsecured with the Neptune Space IRON
MASK attached to the valve. Doing so may cause permanent damage to the
Neptune Space and cylinder valve if the cylinder falls over against the first
stage.
Factory prescribed service for this product must be performed at least once
annually by a factory trained OCEAN REEF Service Technician who is employed
by an Authorized OCEAN REEF Dealer. Repair, service, disassembly, or first
stage adjustment must not be attempted by persons who are not factory
trained and authorized by OCEAN REEF.
Neptune Space IRON MASK is not CE certified to be used with NITROX!
The Neptune SPACE IRON MASK might be used with NITROX gasses up to 40%
O2. It is always recommended to use cleaned air from specified cleaned air
source. SL35TX 1st stage can’t be used with NITROX. Always use NITROX
compatible 1st stages when NITROX is required.
Note: not valid in the European Union.
When diving in cold water (below 45
0
F, or 7
0
C), you must have received
training and certification in the techniques of cold water diving from a
recognized training agency.
Before connecting the regulator to the tank, check the following:
Check that the O-ring on the tank is in place on the valve and is in
perfect working condition (INT WITH Yoke nipple CGA 850 version
only). If it is damaged or missing, it should be replaced.
Verify that the instrumentation and accessories have been installed
correctly.