LS-450 Series Blue LED Pulsed Light Sources
LS-450 Series Blue LED Pulsed Light Sources
7
Setting the Integration Time with the R-LS-450 and the S2000
When using any of the pulsed modes and the R-LS-450, you must ensure that a constant number of flashes occur
for every integration cycle to ensure a continuous and stable signal. Set the integration time in the OOIBase32
software.
To achieve a constant number of flashes per integration cycle, the integration time you select must be a multiple
of the times shown in the table below (depending on the A/D converter you are using).
S2000 JP3 Pin Row
ADC2000-PCI
Acceptable Int. Times
ADC1000
Acceptable Int. Times
/16 32
64
/14 8
16
/12 2
4
/10 2
4
2
Integration time must be a multiple of flash delay
Note: USB-based spectrometers automatically flash the lamp once per millisecond. Thus, there are always a
constant number of flashes regardless of the integration time configured.
R-LS-450-2 Users
The instructions for controlling the R-LS-450-2 are exactly the same as those for the R-LS-450. The R-LS-450-2
has two LEDs, and the jumper configurations described in this manual will control both bulbs simultaneously.
There is no way to control each bulb individually.
