013-RD000-001-02-201208
A
Important Safety Notices
1.
Read this manual before you attempt to use this instrument.
2.
This product contains a Class 2 laser. The laser safety warning label is posted to the side of
the Jaz AP module.
3.
The laser described here is safe to operate, provided the user pays attention to all safety
warnings:
a.
Post warnings in the area of the laser beam to alert those present.
b.
Keep all unauthorized personnel out of the area where the laser is operated.
c.
Whenever the laser is running and the beam is not in use, it is good operating practice to
mechanically block the path.
d.
Never look directly into the laser source or scattering laser light from any reflective
surface. Never sight down the beam into the source.
e.
Maintain experimental setup at low heights to prevent inadvertent beam-eye contact.
f.
As a precaution against accidental exposures to the output beam or its reflection,
operators should wear laser safety glasses attenuated to the wavelength being generated.
4.
Do not remove or modify any installed safety device on this equipment. Doing so will void
your warranty and create an unsafe operating environment.
5.
Only allow qualified personnel to service this unit.
6.
Before using the optical tool for the first time check for transport damage. Do not use the unit
if it is damaged in any way. Contact your dealer for repair or replacement information.
7.
Take care that no objects or liquids enter into the device and that there are no grease residues
on the glass window.
