Connecting the OMX-ADA1x3
3
5 Connecting the OMX-ADA1x3
To connect the
OMX-ADA1x3
, as the example in
Figure 2 illustrates, do the
following:
1. Connect the balanced stereo audio source and up to 3 balanced stereo audio
acceptors
1
to the rear panel of the
OMX-ADA1x3
.
2. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
The balanced stereo audio input is buffered to the balanced stereo audio
outputs and the ON LED lights.
Balanced
Stereo Source
Balanced
Stereo Audio Acceptor 1
Balanced
Stereo Audio Acceptor 3
Figure 2: Connecting the OMX-ADA1x3
Audio Distributor
1 Switch OFF the power on each device before connecting it to your OMX-ADA1x3. After connecting your OMX-ADA1x3,
switch on its power and then switch on the power on each device
Summary of Contents for OMX-ADA1x3
Page 1: ...OMX ADA1x3...
