HDMI Out
HDMI In
Signal LED
:
When the OMX-09HMHM0001 is used as a HDMI signal generator, the LED turns red
when there is HDMI signal output.
When used as a display emulator, the LED turns green when only 5V signal is
detected, or turns red when 5V and TMDS signals are detected simultaneously, or off
when there is no HDMI signal input.
HDCP LED:
When the OMX-09HMHM0001 is used as a HDMI signal generator, the HDCP content
can be selected by 4-pin DIP switch. The LED turns green when HDCP 2.2 is
selected, or red when HDCP 1.4 is selected, off when no HDCP.
When the OMX-09HMHM0001 is used as a display emulator, The LED turns green
when the HDCP content of the HDMI source is HDCP 2.2, or red when it is HDCP 1.4,
or off when no HDCP.
Power:
Micro USB port for power cord connection. The OMX-09HMHM0001 must be
powered on when it is used as a signal generator. When the unit is used as a display
emulator, it can be powered by HDMI source. If the HDMI source has not enough power,
both of the SIG LED and HDCP LED will blink.
DIP Switch:
When the OMX-09HMHM0001 is used as a HDMI signal generator, switch 1
& 2 are used for built in EDID selection, and switch 3 & 4 are used for HDCP content
selection.
1.
2.
3.
a.
b.
4.
a.
b.
5.
6.
Operation Controls and Functions:
Summary of Contents for OMX-09HMHM0001
Page 1: ......
