Operation Controls and Functions:
Remote:
No
Name
Power on or Standby Power on the matrix or set it to standby mode
Info
Press this button to display the serial port baud rate and IP address in the upper right corner of the screen
Input / Output
Input 1/2/3/4:
Select the signal output channel
< , >:
Select the last or next signal input channel
Output 1/2/3/4:
Select the signal output channel
All:
Select all ouput channels simultaneously.
Res:
Press this button to switch output channel resolution
Matrix mode: press
Output 1/2/3/4
or
All
, then press
Res
to switch the output resolution circularly
Video wall mode: Press
Res
directly to switch the output resolution for four output channels simultaneously
Operation Instruction:
You need to press the Output button firstly and press the Input button to select the
corresponding input source. For example, press Output-x (x means output button from 1 to 4, including "All" button),
then press Input-y (y means input button from 1 to 4)
Video Wall
Video Wall mode selection:
Press the video wall mode button directly to enter corresponding mode.
Source selection for the video wall group:
Press
Output 1/2/3/4
or
</>
to select the video wall group firstly, then press
Input 1/2/3/4
or
</>
to select the input source.
Bezel Adjustment:
Press
</>
of H-Bezel / V-Bezel to adjust the bezel.
