Ocean Digital WR-880N, User Manual

Page: 11 / 33

- 11 -
Network Setup
The Internet Radio must have a high bandwidth internet connection
and a wireless (Wi-Fi) home network connected to it to be fully
functional.
Plug the A/C Power adaptor into a wall socket and the back of the
Radio.
Turn On the rear panel On/Off switch - the display will show a list of
available languages. Highlight and Select a language.
Network Setup
The first time the Radio is turned on after leaving the factory a
Configure Network wizard is automatically started:
1) Highlight and Select Yes to connect to the Wi-Fi network
2) The display will change and display a list of options – Select
Add/Remove AP
3) The display will change and display a list of options – Select Add
AP (Scan)
4) The display will show a list of available networks – Select your
network
5) The display will ask for your passphrase – this is often called
passcode or password
- highlight the first digit by using the Tune/Select knob on the front
of the radio, or the ▲▼ buttons on the remote controller.
Note: If an error is made correct it by using the move back button
on the front of the radio or ◄ on the remote controller.
- Select by pressing and releasing the Tune/Select knob
- highlight the next digit
- Select by pressing and releasing the Tune/Select knob
- Repeat until the last digit has been Selected
- Confirm by pressing and holding the Tune/Select knob until the
display changes.
6