3
Switching on the radio
Plug the connector plug of the mains adaptor into the DC jack on the unit. Connect the other
end of the adaptor to the wall socket.
Caution: Use only the main adaptor supplied with the radio. Connecting a power supply with a
different rating will cause permanent damage to the radio and may be hazardous.
The display on the front of the radio will light up and show:
Then you can select your prefer language on the radio.
It will ask you if you want to Enable the “Check Network” when Power on”, it is suggested to
choose “Yes”. Then the radio will always check the available WiFi network automatically.
Connecting to your WiFi Network
The screen below will appear. You can choose Yes to proceed to search for the available WiFi
network. If your router has the WPS function, you can select the “Yes[WPS]” to proceed.
It will then start scanning the network. After the search is done, it will display a list of the
available router.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi
Protected Access) code. If your network is not configured to be with the WEP or a WPA code,
the unit will connect to the router automatically.
Note: The encryption code would have been set up by the person who set up and
configured your network.
Welcome
• English
Deutsch
Français
<
2/7
8:54AM
01:01
Would you like to
configure Network now?
Yes(WPS) NO
Yes
01
:
4 4
Linksys
Homeaudio
Demo
MOVE
INPUT
:
OK
Ent er
Password
1
/
1
16
:
23
