Weather
You can set to display the weather information in standby mode
by choosing different regions and the temperature unit.
DAB/FM Setup
FM Mode
Option to choose hearing in Stereo or mono.
Note: As the radio is a mono, this option does not apply.
FM Threshold
Option to adjust the scanning threshold to pick up stronger or
weaker FM stations. There are two types of threshold, Seek
Threshold and Stereo Threshold. A stereo separation
adjustment is provided in the FM receiver for lowering the
separation level of the left and right signals and approaching the
mono reception to reduce the noise when the received signal
strength of the FM signal is weak, When the signal strength is
strong, the separation level is increased to automatically receive
stereo reception. If the “Strong” option is selected, only the radio
stations with good separate level will be received (in stereo). On
the contrary, if “Weak” option is selected, radio stations with low
separation level will be received (in mono).
DAB Threshold
Option to adjust the scanning threshold to pick up stronger or
weaker DAB/DAB+ stations.
DAB/FM Information
You can select to enable or disable the DAB/FM information.
Service Following (DAB/FM-IR)
This is a feature to help finding the same channel over internet
provided that the radio station has an internet stream available
and it is suitable to play on the radio.
Listening over internet radio allows free of noises which usually
caused by interference or weak reception over FM.
You can choose to enable or disable this feature.
After the scan is done on FM or DAB, choose a channel to play. If
the same channel is available on Internet, there will be an icon
appeared as follow:
Press and hold the
< OK >
button, it will switch to the internet
Configuration
- 21 -
