5
press DOWN or UP to show the alarm type you need on the display, such as Beep, and
then press VOLUME/SELECT to confirm.
6) The display shows “00:00”, press the UP or DOWN button to adjust the Hour and push
down the rotary knob to confirm, then set the minute accordingly and confirm to finish
the setting.
When alarm is triggered, alarming:
1.
You can press ON/OFF button to turn off the alarm.
2.
If the wake up mode is set to DAB+, but there is no signal on the DAB+ station, then alarm
will be triggered without sound, just the display will show the alarm icon.
3.5 PI code
This is service ID, reserved for further service.
3.6 Scanning for FM stations
1) Auto Scan
You can long press DOWN or UP to scan the stations automatically, the radio will stop
to playing once one station is searched.
2) Manual Tune
You can short press DOWN or UP to scan for stations by 0.05MHz every time. You can
press “Dial/Select” knob to confirm the choice or wait for 5s then turn to the displayed
station automatically.
3.7 Scanning for DAB stations.
1) Manual Tune
In DAB mode, Long press VOLUME/SELECT to enter the manual tune, then press
DOWN or UP to select a specific digital radio channel frequency from 5A to 13F, and
press VOLUME/SELECT to confirm.
2) Full Scan
You can use the scan key on the remote control to do the full scan if necessary.
3.8 Factory reset
There may be times when you need to reset your receiver back to its original factory
settings i.e. when you move the radio to another part of the country, so that you can pick
up the national DAB stations in that area. If you don't do this, then when you select a
station on the radio, it may no longer be available.
1) Hold the MODE button, then the display will show “Press Enter Key to Reset”;
2) Press VOLUME/SELECT to confirm, then the display will show “System Reset”, and
followed with “System Reset OK” means the reset is finished,
3) Then the radio will go for DAB auto scan and play the first alphanumerically found
station, if there is no available station; the display will show “NO SERV”. If there is no
DAB signal, the display will show “No signal”
REMARK: Please note that once the reset has taken place, you will lose all of your stored
presets both DAB and FM, and the internal DAB registry.
4. STORE and RECALL
4.1 Storing stations
You can store up to 10 of your favorite stations by the preset function; this will enable you
