Installation
1
Remove the back cover
You must turn off and unplug the unit when changing the filters.
2
Install the Filter
Grasp the top of the back cover and pull outwards to remove the back cover.
Hold and pull the drawstrings
on the top and bottom of the
filter assembly and remove
the filter assembly.
Remove the protective
covering from the filter.
Place the filter assembly back into the air purifier
housing. Ensure that the drawstrings and the
Activated Carbon Pre-Filter are facing outward.
3
Install the back cover
Replace the back cover by placing the tabs on the bottom of the back cover into the slots on the air purifier.
Gently push the top of the back cover to secure in place.
5
NOTE: Filter assembly is the Activated Carbon Pre-Filter plus the True HEPA Filter
