Oce VarioPrint i Series Operation Manual Download Page 281

Page: 281 / 402

Ink, ColorGrip and maintenance liquid supplies in the printer

The cyan, magenta, yellow and black

ink

containers are stored in the ink cabinet. This is also the

storage location of process maintenance liquid (

PML

) and

ColorGrip

liquid. There are two types of

ink cabinets: an ink cabinet with doors and an ink cabinet with drawers. The two models have a
different arrangement of containers.

[302] Location of ink cabinet with doors

[303] Location of ink cabinet with drawers

The [Supplies] pane of the control panel displays the status of the stock of inks, ColorGrip liquid
and PML liquid stock. (

Filling levels of supplies and waste on page 381

)

Ink, ColorGrip and maintenance liquid supplies in the printer

Chapter 12 - Maintain the printer

281

Summary of Contents for VarioPrint i Series



















































































































































































































































































































































































































Search results

Summary of Contents for VarioPrint i Series

Reviews:

Related manuals for VarioPrint i Series

Brands by name

Popular brands

Oce VarioPrint i Series, Operation Manual

Search results

Summary of Contents for VarioPrint i Series

Reviews:

Related manuals for VarioPrint i Series

Brands by name

Popular brands