Oce VarioPrint 6180 User Manual Download Page 56

Page: 56 / 306

Manual planning workflow profile

[Manual planning]

Print production

Job planning

DocBox

Scheduled

jobs

Finishing and delivery

Printing

Media loading

Waiting

jobs

[17] Manual planning workflow profile

• The manual planning workflow fits

a workflow in which you want to
determine the print priority of the
jobs.

• All jobs are received in the list of

waiting jobs.

• The print system selects another

output tray for each next job.

Unattended workflow profile

[Unattended]

DocBox

Scheduled

jobs

Finishing and delivery

Printing

Media loading

Waiting

jobs

Print production

Job planning

[18] Unattended workflow profile

• The unattended workflow profile

fits a workflow in which productiv-
ity is very important.

• All jobs go to the list of scheduled

jobs and are printed.

• To keep the system running, you

should make sure consumables
remain available and you remove
printed output and waste on time.

The Default Settings for [Receive]

The default [Receive] settings

Workflow profile

[Receive] settings

[Destination of print job]

[Destination of DocBox job]

[Standard]

[Scheduled jobs]

[Job by job]

[As in job]

[Scheduled jobs]

[Check and print]

[Scheduled jobs]

[Manual planning]

[Waiting jobs]

[Scheduled jobs]

[Unattended]

[As in job]

[Scheduled jobs]

Work with the Workflow Profiles

Chapter 5 - Prepare the print system

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Search results

Summary of Contents for VarioPrint 6180

Reviews:

Related manuals for VarioPrint 6180

Brands by name

Popular brands

Oce VarioPrint 6180, User Manual

Search results

Summary of Contents for VarioPrint 6180

Reviews:

Related manuals for VarioPrint 6180

Brands by name

Popular brands