Oce VarioPrint 6180, User Manual

Page: 42 / 306

• Tray-to-tray mapping
You specify which logical tray (indicated by a number) corresponds to a physical paper
tray. The print system will use the media that are loaded in the physical paper tray to which
the job refers via a logical tray. Also other paper trays that contain these media are used
when needed. The control panel shows the media which the job uses. For color
management, the output profile associated with the media family of the media is used.
Transaction printing setups
A transaction printing setup is a collection of preset print settings for a transaction job, such as
output location, data resolution, face orientation, offset stacking, font capture, and logical page
size.
Create transaction printing setups in the Settings Editor.
Work in transaction printing mode
When you want to print in the transaction printing mode, first activate the transaction mode and
establish the connection with the IPDS or PCL host. When you print in the transaction printing
mode, the schedule informs you which types of media the streaming job uses. The schedule
cannot predict the time needed for a streaming job.
Image adjustment
You can create a transaction printing preset with an image shift definition. This is useful for better
alignment of variable data, such as names or addresses, on the page. You define the image shift
on the control panel, but also in the Settings Editor.
Secure error recovery
When an job error occurs in transaction printing mode, the job recovery takes place from the
page that caused the error. When multiple pages of the same document are not allowed, for
example, for lotteries and bank accounts, you must adjust the error recovery settings. When you
select the secure error recovery in the Settings Editor, the print system does not perform an
output recovery and deletes all remaining pages. A stack eject follows when the printed output
goes to the high capacity stacker. As a result, you must submit the job again.
Transaction printing workflow
42 Chapter 3 - Explore the ease of operation
Océ VarioPrint 6000 line