manualshive.com logo in svg

Oce VarioPrint 6180, User Manual, Page: 151 / 306

Share
Download
Oce VarioPrint 6180 User Manual Download Page 151

Change the stacking method per job

Introduction

The [Offset stacking] function creates a visible distinction between sets or jobs in an output
location. The active workflow profile or the active automated workflow determines the default
type of offset stacking.

You can only change the type of [Offset stacking] per job when the [Offset stacking] setting of the
active [Workflow profile] is set to [Sets (as in job)].

NOTE

You cannot change this setting for the active print job  .

NOTE

Automated workflows can be defined through the Settings Editor. You can find more

information in the online help of the Settings Editor.

Procedure

NOTE

Remember that you can only change the stacking method per job when the active
[Workflow profile] is set to [Sets (as in job)].

1.

Touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs].

2.

Touch the job you want to change.

3.

Touch [Properties] - or touch the job 2x to open the [Properties] window.

4.

Touch the [Print delivery] button.

5.

Touch the [Offset stacking] button to toggle between [On] and [Off].
The offset stacking is defined per N sets. By default, this number is 1. If a number is specified, this
specified number of printed sets of a job will be delivered to an output location in one straight
stack, the next number of printed sets are stacked with an offset.

6.

Touch [OK].

Related information

Work with the Workflow Profiles on page 54

Change the stacking method per job

Chapter 9 - Carry out print jobs

151

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Reviews:

No comments