Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 24 / 264

Shut down the machine
Introduction
This section describes how to shut down the machine completely, for example for the
holidays.
Note:
If you want to put the machine into the sleep mode manually (see ‘The power modes’ on
page 20 ), for example at the end of a working day, you must press the On/Off button
. Then the machine will go into the sleep mode as soon as the list of 'Scheduled jobs'
is empty. When the machine is in the sleep mode, the On/Off button is continuous
amber.
Shut down the machine
1.
On the operator panel, press the 'System' button.
2.
Touch the 'Setup' button.
3.
Touch the 'Shut down system' button in the 'User interface' section.
A dialog box asks you to confirm that you really want to shut down the machine.
4.
Press 'Yes'.
A message indicates when the shutdown will begin. Wait until the following has happened.
• The Hold button and the Release button are off
• The On/Off button blinks amber
• The screen of the operator panel is off.
5.
Put the power switch at the back of the machine in the 'O' position.
Chapter 3 - Power information 24
Shut down the machine