Oce VarioPrint 2090, User Manual

Page: 74 / 187

74 Océ VarioPrint 2090 User manual
Covers in a print job
Introduction
Task for operators
The Océ VarioPrint 2090 allows you to use covers at the front side or back side
of your document. When you define a print job in for example the printer
driver or in Océ Intra Logic, you can indicate the use of covers.
To use covers, you can do one of the following.
■
Indicate that a paper tray contains covers.
■
Load the covers in a paper tray that the Océ VarioPrint 2090 indicates when
the print job with the covers starts to print.
You can also define the use of covers on the operator panel.
Note:
The key operator can define a default paper tray for covers in the Océ
Settings Editor.
How to create a print job with covers
1
Select the print option in your application.
The print window of your application appears.
2
Select the Océ VarioPrint 2090 printer.
3
Select 'Properties' to access the settings in the printer driver.
The 'Job' tab is opened automatically.
4
Select a template or define the settings.
5
Select 'Settings'.
6
Select 'Paper'.
7
Check the check box for 'Front', 'Back', or both in the 'Covers' section.
8
Click 'OK' to confirm your settings.
9
Click 'OK' to send the job to the mailbox.