Oce VarioPrint 2050-70, Job Manual

Page: 76 / 174

76 Océ VarioPrint 2050-70 Job manual
Paper section
[46] The Paper section
[46] The Paper section
Card Description of the function
'Paper output'
■
Indicates the output bin for the printed sets: 'Multi-size
bin' or 'Based on size'(see ‘
Output bins specification ’ on
page 144 ).
Select 'Multi-size bin' when the finisher does not support
the completed printed sets.
■
'Banner page' allows you to add an extra front sheet to the
print job.
The banner page gives information about the job.
'Covers' Definition of the covers for the printed sets.
You can select a front or a rear cover for the printed sets.
The 'Cover' function shows the paper tray that is used for the
covers.
'Paper input' ■
The paper tray that will be used, is set through the Océ
VarioPrint 2050-70 printer driver settings.
The value changes to 'Tray' when you select a different
size for the printed sets.
■
The 'Special feeder' function allows you to use special
material, such as an overhead sheet (see ‘
Special feeder
specification ’ on page 143 ).
Additional to the standard paper sizes, you can use
non-standard sizes for the special feeder.
The upper icon in the 'Size' function box provides several
paper sizes to select from (see ‘
Print on special material ’
on page 93 ).
The 'Tray' function can show a computer symbol. The
symbol refers to the 'As in document' setting in the Océ
VarioPrint 2050-70 printer driver.