Oce VarioPrint 2050-70, Job Manual

Page: 126 / 174

126 Océ VarioPrint 2050-70 Job manual
How to improve the image quality if the originals are mainly text
1
Put and align the originals face down into the automatic document feeder.
2
Select the 'Scan' mode .
The 'Workflow' section opens automatically.
3
Select a 'Scan profile' with the Arrow keys .
4
Activate the 'Original' section.
Select '1-sided' or '2-sided' in the 'Original' function box.
5
Select the icon in the 'Original type' function box to define the orientation of
the information and the binding edge of the originals.
6
Activate the 'Digital document' section.
Make sure that the 'Page size' card is open.
7
Select the size and the orientation of the required page in the 'Size' function
box.
Make sure that the orientation of the required page matches the feed direction
of the photo.
Note:
When the size of the digital document does not match the dimensions of
your photo, you must adjust the enlargement or reduction (see ‘Make an
enlarged or reduced digital document’ on page 121).
8
Activate the 'Digital document' section.
Open the 'Image quality' card.
9
Select 'Text' in the 'Optimize' function box.
10
Use the Arrow keys to adjust the 'Lighter or darker' value from 2 down to
-2.
11
Press the Start key .