Oce VarioPrint 2050-70, Job Manual

Page: 125 / 174

The scan function 125
How to scan a photo on the glass plate
1
Place and align the photo face down on the platen.
Follow the feed direction according to the dimensions of the photo.
2
Select the 'Scan' mode .
The 'Workflow' section opens automatically.
3
Select a 'Scan profile' with the Arrow keys .
4
Activate the 'Original' section.
Select '1-sided' in the 'Original' function box.
5
Select the icon in the 'Original type' function box to define the orientation of
the information of the original.
6
Activate the 'Digital document' section.
Make sure that the 'Page size' card is open.
7
Select the size and the orientation in the 'Size' function box.
Make sure that the orientation matches the feed direction of the photo (see
‘
Make an enlarged or reduced digital document ’ on page 121 ).
8
Open the 'Image quality' card.
9
Select 'Photo' in the 'Optimize' function box.
10
Use the Arrow keys to adjust the 'Lighter or darker' value from 2 down to
-2.
[88] Select Photo to improve the image quality
[88] Select Photo to improve the image quality
11
Press the Start key .