Oce PlotWave 900, User Manual

Page: 292 / 396

Introduction
Introduction
Problems that can occur include
• Original jams
• Paper jams
• Reinforcement unit problems
• Problems that can be corrected if you follow the instructions on the display
• Other problems
When an error occurs, the display informs you about:
• What the problem is
• Where the problem occurred
• How to correct the problem
Normally, the paper moves through the system without problems. On the graphic
display, a cover or door indicates in which part of the system the paper has stopped.
Stickers on some parts of the system indicate which green handles, green knobs, green
bars and covers, etc. you have to lift, press or open to remove any jammed paper.
The display guides you through a sequence of steps to correct the problem. If a jam
occurs in more than one location, the display will continue to instruct you until all
jammed paper has been removed.
After the error is corrected, the display gives you instructions on how to continue the
job.
Chapter 12 - Solve problems 292
Introduction