Oce PlotWave 900, User Manual

Page: 261 / 396

How to set the media separation method
Introduction
When you connect the Océ Double Decker Pro to the printer, you can define the separa-
tion settings in Océ Express WebTools .
Note:
For more information on how to enable media separation and how to copy with a sepa-
ration sheet, see
‘How to set the media separation method’ on page 261 , ‘Define the separation
sheet preferences’ on page 111 , ‘Copy with a separation sheet’ on page 221 .
Set the media separation settings
To define the settings:
1.
Open Océ Express WebTools on the controller or any other workstation and log in as
'Key operator' or 'Power user'.
2. Click on the 'Preferences' - 'System settings' tab, and go to “Separation Sheet”.
3.
Click “Edit” in the settings group bar or click on the value of a single setting.
4.
Enter your preferred settings.
5.
Click “OK” to confirm you entries or “Cancel” to reject your entries.
Result
The printer will print with the selected separation method. Your output is delivered on
the Océ Double Decker Pro.
Chapter 10 - Océ Double Decker Pro 261
How to set the media separation method