Oce PlotWave 900, User Manual

Page: 176 / 396

Job templates
A job template contains direct access to four settings for fast selection or verification. It
also contains the default settings for a certain job.
[113] The job templates at the bottom of the scanner operator panel
The figure shows an example with the following job templates:
• Template 1
• Template 2
• Template 3
• Template 4
• Last used
The key operator defines the settings in the Océ Express WebTools. The key operator
can change the template names, for example into the following template names.
• Single copy
• Set copy
• Manual feed
• Originals
• Lasr used
After you select a template, the sections are displayed. The sections provide access to the
settings for the scanner input, the printer output and the scan-to-file output. Use the
Custom Card here to provide access to frequently used settings in relation to the type of
job.
Chapter 6 - Use the Océ TDS600 scanner to copy 176
Job templates