Oce plotwave 345, Operation Manual

Page: 175 / 300

Preset Settings values Settings values Function
[Area to
erase] [Area to erase: X
origin] From 0 to 914 mm or
0 to 36". [The horizontal offset where the
erase area starts.]
[Area to erase: Y
origin] From 0 to 6000 mm or
0 to 250". [The vertical offset where the erase
area starts.]
[Area to erase:
width] From 0 to 914 mm or
0 to 36". [The width of the area to erase.]
[Area to erase:
length] From 0 to 6000 mm or
0 to 250". [The length of the area to erase.]
Preset category: [Finishing]
Preset Settings values Function
[Delivery] [Top Delivery Tray] Location on top of the printer that deposits the
sheet face-down.
NOTE
Not all media types can be delivered
to the [Top Delivery Tray].
[Back output] Location at the back of the printer that deposits
the sheet face-up.
[Fold] [On]
[Off] When enabled and a finisher is installed, you
can fold your output.
Advanced settings for copy jobs
Chapter 4 - Use the Printing System 175