background image

1-4

1. Printer Settings

Menu

number

P31

P32

P35

P37

P40

P42

P43

P44

P45

P46

Item

KPDL Error Report print out ON/OFF

Sets whether an Error Report will be automatically
printed out whenever a KPDL error occurs.

Auto emulation switching (parallel interface)

Sets the back-up emulation that, depending upon
the type of data received, may be switched to for
printing out when “KPDL (AUTO)” (setting: 7) is
selected under the “Emulation protocol” setting
(menu: P30).

Emulation protocol (network interface)

Sets the emulation protocol that will be used.

Auto emulation switching (network interface)

Sets the back-up emulation that, depending upon
the type of data received, may be switched to for
printing out when “KPDL(AUTO)” (setting: 7) is
selected under the “Emulation protocol” setting
(menu: P35)

Number of copies

Page Protect

If “AUTO” (setting: 1) is selected here, the machine
will monitor the data and, if necessary, will automati-
cally turn Page Protect ON. If a “Print overrun” error
(error code: E80) does happen to occur even then,
the machine will automatically change the Page
Protect setting to “ON” (setting: 2).

Line Feed (LF) handling (parallel interface)

Line Feed (LF) handling (network interface)

Carriage Return (CR) handling (parallel interface)

Carriage Return (CR) handling (network inter-
face)

Available settings

(1) On
(2) Off

(1) Line Printer
(2) IBM Proprinter
(3) DIABLO 630
(4) EPSON LQ-850
(5) PCL 6

(1) Line Printer
(2) IBM Proprinter
(3) DIABLO 630
(4) EPSON LQ-850
(5) PCL 6
(6) KPDL
(7) KPDL (AUTO)

(1) Line Printer
(2) IBM Proprinter
(3) DIABLO 630
(4) EPSON LQ-850
(5) PCL 6

001 - 999

(1) Auto
(2) On

(1) LF only
(2) CR and LF
(3) Ignore LF

(1) LF only
(2) CR and LF
(3) Ignore LF

(1) CR only
(2) CR and LF
(3) Ignore CR

(1) CR only
(2) CR and LF
(3) Ignore CR

Remarks

Available only when the Network
Card is installed.

 Available only when the Network
Card is installed.

Available only when the Network
Card is installed.

Available only when the Network
Card is installed.

Summary of Contents for OP14



































































Reviews: