15
3 Make Fax Settings (imageRUNNER 1025iF Only)
Use the keys shown below to enter information in the machine.
You can enter the following characters in each input mode:
Use – [numeric keys] to enter characters.
Press – [numeric keys] repeatedly until the
required character appears.
Press to enter symbols.
Press to switch between input modes:
<:a>: Letter mode
<:1>: Number mode
Press [
] or [
] to move the cursor
position.
Press [Clear] to delete the character at the
cursor position. Press and hold [Clear] to
delete the entire entry.
Press [
OK
] to set the entry and to proceed to
the next screen.
●
●
●
●
●
●
Register User Telephone Number and Unit Name
This section describes the procedure for registering the user telephone number and unit name. For instructions
for entering information, refer to “Information About the Keys” below.
Information About the Keys
The display returns to the standby mode:
The machine may enter the standby mode (Auto Clear function) while you are
setting it up. Make the setting again from the main menu.
The display turned off:
The machine may enter the sleep mode while you are setting it up. Press
[Power] to turn the machine back ON and continue the setup.
1
Press [Additional Functions].
●
●
2
Press [
] or [
] to select <3. TX/RX
SETTINGS>, then press [
OK
].
3 . T X / R X S E T T I N G S
A D D .
F U N C T I O N S
3
Press [
] or [
] to select <2. FAX SETTINGS>,
then press [
OK
].
2 . F A X
S E T T I N G S
T X / R X S E T T I N G S
