Oce FS-520, User Manual, Page: 29 / 48

Copying operations 3
FS-520 3-3
3 Copying operations
3.1 Using Finisher FS-520
The Finisher FS-520 has a primary (main) tray and a secondary (sub) tray,
each of which has the following output modes.
Output to the primary (main) tray
Combined with the output modes above except staple mode, you can also
choose to output face up or face down, and output front to back or back to
front.
Example: Make 3 copied sets from 4 original sheets
Mode Description
Non-sort Non-sort mode simply means that the offset-stacker finisher modes are not se-
lected. Copies will be stacked upon exit without being offset by sorted sets.
Collate Collate mode outputs multiple copies of the original set, having each sorted set
offset by 30 mm upon exit
Uncollate Uncollate mode groups together multiple copies of each original and offsets the
sets by 30 mm upon exit.
Staple Staple mode offsets and staples each sorted set.
Non-sort Staple Collated Uncollated
1 oblique
staple
Offset by 30mm
Offset by 30mm
2 staples