manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 248

Scan to a USB key

Introduction

When you insert a USB key in the user panel, you can scan to USB.

Before you begin

• Before you scan to USB, make sure the correct settings are enabled. For more information see,

Enable or disable USB on page 102

.

• You can create a template with USB as destination to easily submit your job. For more

information, see 

Create a new template on page 123

.

Procedure

1.

Feed the original face up and centered on the original feeding table.

2.

Insert a USB key into the USB port on the user panel.
The scan tile is automatically selected on the user panel. Select a template with USB as
destination or change the destination to USB.

3.

Tap the green button to start the scan job.

NOTE

Wait until the light in the USB port stops blinking, before you retract the USB key.

Result

A scan to file is made, and saved on your USB key. You can retrieve the file from your USB key.

Scan to a USB key

248

Chapter 4 - Use the Printing System

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands