manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 102

Enable or disable USB

Introduction

If you want to use USB as a location, you have to make settings for USB first. You can make the
settings in Océ Express WebTools.

Illustration

Procedure

1.

Open the [Configuration] - [External locations] tab.

2.

Select [USB], and click on the [Edit] icon under [Actions]. A window opens.

3.

Enter the [Name] recognizable for the user. This name appears on the user panel.

4.

Enter the [Description] of USB as location.

5.

Under [Enabled functionalities] you can choose the functionalities you want to use for USB.
• Choose [Print from and scan to], when you want to enable print from and scan to USB.
• Choose [Print from only] if you want to enable print from USB only.
• Choose [Scan to only] if you want to enable scan to USB only.
• Choose [None] if you want to disable the USB functionality.

6.

Click [Ok] to save the settings for USB as an external location.

Result

When you enable USB and insert a USB key on the user panel, the external USB location can be
used via the user panel and in Océ Express WebTools.

If you disable USB, USB cannot be used as an external location.

Enable or disable USB

102

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands