4
4-19
Network Setup options
AppleTalk Zone
List of zones
The Océ 760C searches the network for AppleTalk zones in your network segment.
Scroll through the list to select the AppleTalk zone in which you want the Océ 760C
to appear. If your segment has only one zone, the Océ 760C is assigned to that zone
automatically.
The message “No AppleTalk zone found” may mean your network has no zones, or the
network cable is not connected (see
). Choose OK to dismiss the message.
TCP/IP Setup options
When you set an IP address, subnet mask, or gateway address for the Océ 760C during
Setup, you can allow the Océ 760C to get these addresses automatically from a
DHCP, BOOTP, or RARP server. First, turn on or restart the Océ 760C and allow it
to reach Idle. Next, make sure the DHCP, BOOTP, or RARP server is running.
Finally, perform Océ 760C Setup.
To configure the Océ 760C for TCP/IP, choose TCP/IP Setup.
Choose Ethernet Setup and enter the appropriate settings. Choose each network
type you use (Ethernet and/or Token Ring) and enter the appropriate settings.
Token Ring Setup appears as an option only if you have enabled Token Ring in Port
Setup.
N
OTE
:
If TCP/IP is running on
both
an Ethernet and a Token Ring network, it is
assumed that the two networks are already routed to each other. The Océ 760C
does not function as a router.
N
OTE
:
Concurrent use of Ethernet and Token Ring is not supported on the
Océ 760C.
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup
Exit TCP/IP Setup
Ethernet Setup
Token Ring Setup
TCP/IP Setup
