4
4-12
Performing Setup from the Control Panel
N
OTE
:
If you make a mistake during Setup, you can always use the Menu button to
cancel without saving changes. Pressing the Menu button cancels what you are doing
in the current screen to bring you to the next higher-level menu. You may need to press
Menu more than once to return to the top level for the particular Setup in which you
are working. Once at the top level, you can enter a Setup menu again, or exit without
making changes.
When you have entered the settings, you need to save the changes. You are usually
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you
choose No, your previous settings are retained. If necessary, the Océ 760C reboots
after you exit from the Setup menu.
Server Setup options
The Server Setup menu lets you specify system information that pertains to the
Océ 760C and all users. Accessing the menu is described on
When you choose Server Setup, the options appear in sequence, as follows. Default
values, where applicable, appear in square brackets. Words shown in italics indicate
that a product- or site-specific value is displayed.
Server Name
Default server name
Enter a name for the Océ 760C (up to 15 characters long). This name appears in the
Chooser on an AppleTalk network.
N
OTE
:
Do not use the device name (
CS120-CS125
) as the server name. Also, if you have
more than one Océ 760C, do not give them the same name. Windows NT 4.0 is not
designed to handle two computers with the same name in the same workgroup or
domain.
System Date
Enter the correct system date in the standard form for your use. The date appears on
the Job Log.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Press button for Server Setup
