4
4-8
Performing Setup from the Control Panel
Accessing Setup options
T
O
ACCESS
S
ETUP
WHEN
THE
O
CÉ
760C
IS
AT
I
DLE
1.
Make sure the information screen on the Control Panel reads Idle.
If Printing or RIPping appears, the Océ 760C is processing, and you must wait
until the system finishes and reaches the Idle state.
2.
Press the Menu button on the Control Panel to go to the Functions menu.
3.
Scroll with the Down arrow button and press the line selection button next to Run
Setup.
If an Administrator password has been set on the Océ 760C, you are prompted to
enter it before you can perform Setup (see
4.
When prompted, confirm your choice to proceed to Setup.
5.
Press the line selection button to choose a Setup menu or command.
Use the Down arrow button to view the remaining screens of the main Setup
menu.
6.
Perform Server Setup, Network Setup, and Printer Setup, in that order.
This is the minimum required for initial Setup. Later, you can complete the
remaining Setups, either from the Control Panel or a Windows computer.
7.
Set an Administrator password to protect your Setup from unauthorized changes.
Review the settings described in this chapter.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
PS Setup
Color Setup
Job Log Setup
Change Password
Setup
