1
1-10
Connecting to the Network
Connecting network cable to the Océ 760C
In this section, the back panel of the Océ 760C is illustrated, followed by information
for connecting to the Ethernet board. For information about connecting to a Token
Ring network, see
Shut down the Océ 760C
before attaching it to any network device. If the Océ 760C
has just finished processing, wait five seconds after the system reaches the Idle state
before using the power switch to turn it off. For the proper shutdown procedure, see
.
Back view of the Océ 760C
!
10/100BaseT Ethernet (RJ-45)
Copier interface connector
Dongle
