7
7-12
Administering the Océ 760C
Starting and shutting down the Océ 760C
Generally, you can leave the Océ 760C running all the time. This section describes
how to shut down and restart the Océ 760C when necessary.
Starting the Océ 760C
To start the Océ 760C, move the power switch on the back of the Océ 760C to the On
position. If the copier is also turned off, turn it on before turning on the Océ 760C.
Diagnostic messages appear on the Océ 760C Control Panel. If any diagnostics fail,
more information and instructions appear. Contact your service representative if the
Océ 760C encounters problems while running the diagnostics. The Océ 760C
continues starting up and displays the message Idle when it is ready to receive data.
N
OTE
:
If an Administrator password has been set, you are required to enter it to
access Setup.
Power switch
