5
5-14
Setting up the Océ 760C from a Windows Computer
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see
The Océ 760C requires a unique, valid IP address. You can set a static address or
specify that the Océ 760C use DHCP, BOOTP, or RARP to obtain IP addresses
automatically.
N
OTE
:
If you specify the DHCP, BOOTP, or RARP protocol, the Océ 760C reboots
when you save your changes and exit Setup. Allow the Océ 760C to reboot and return
to Idle before printing a Configuration page or proceeding with any other operations.
