Oce 7050, Technical & Service Manual, Page: 29 / 275

8 TSM Océ 7050 Dismantling
Dismantling
3 Necessary parts
1
pallet and material to tighten the machine onto the pallet
2
transport reinforcement bars
3
3 Cable ties
4
tape
5 protection material for the fuser
6
cardboard protections for the exposure lamp
7
protection sheet for the drum
4 Procedure
1
Remove the developer from the developing unit
2 Place the protection sheet for the drum.
3 Lock the upper feed assembly with two cable ties.
4
Place the cardboard protections between the lamp holder and exposure lamp at
both sides.
5 Place the protection material between the absorber and frame in the fuser unit.
6
Roll up the main cable and fasten it with a cable tie.
7
Tape the cable onto the absorber.
8
Mount the transport reinforcement bars.