Oce 31x5E, User Manual, Page: 24 / 84

24 Océ 31x5E Scan Jobs
Reducing or enlarging images
Originals in the automatic feeder
When you place an original on standard
paper size (11x17”, 8.5x11” or 5.5x8.5”) in the automatic feeder, the
corresponding page size is automatically selected. If you need an enlarged or
reduced image instead, simply select the required page size. In doing so, the
page size selection will switch to manual. Because the ‘Enlargement or
reduction’ function is set by default to automatic, the corresponding reduction/
enlargement percentage will be set accordingly. If, for some reason you wish
to use another percentage, you can manually select a reduction or enlargement
percentage of between 25 and 400%.
Originals on the glass platen
The size of originals cannot be automatically
detected on the glass platen. Thus, when scanning from the glass platen, you
will have to select the page size and possibly a reduction or enlargement
percentage manually.
Zoom direction
The starting point and the zoom direction differs for originals
in the automatic feeder versus originals on the glass platen. This effects the
position of the image on the page (see figure 8).
[8] Reduction/enlargement differences between glass platen and automatic feeder
Test copy
Make a test copy first, especially when reducing or enlarging
from the glass platen. Start scanning when you are satisfied with the result.
on glass platen
enlarged
image
reduced
image
small
original
original
enlarged
image
reduced
image
in automatic
feeder
zoom in
autom. feeder
zoom on
glass platen