Defining user defined file format
107
Record
The following data must exist for each header record:
[Record_N]
Padding character=<space|zero|any ASCII character>
Data Format=<integer|string>
Length=<length of the data field in bytes>
Offset=<offset from the start of the image file>
Data=<one of the parameter names>
Note:
Record_N is the record number in the image file header. It is starting at
zero and increases depending on the number of records you used.
Note:
As default Padding Character ‘space’ is used.
Note:
As default Data Format ‘string’ is used.
Note:
Constant from the corresponding record in the Header Template file.
Note:
Pointer in bytes to the start of this record.
Note:
The parameter is one of the following parameter names:
image size
the compressed data size in bytes
file name
the file name of the image
resolution
the resolution of the file
drawing size
the size of the paper (A4, E, etc.)
reduction
the reduction ratio used on the film
width
the image width in pixels
length
the image length in pixels
hollerith
the hollerith code read from the card (or edited)
date and time
system date and system time
Summary of Contents for 3050
