OCCITALINA OXTOPUS EIA-709, User Manual

Page: 8 / 54

Release EN 0.93 Page 7/53
User Manual
1.3 Ethernet connection
All references are equipped with two RJ45 connectors. Communication can be done
independently on both sides with network.
Figure 2
Ethernet Connectors Eth0 and Eth1
The two RJ45 Ethernet connectors are configured in factory as Ethernet switch.
The main connector is the left ETH0. The Computer must be primarily connected to this port.
In this configuration, the router has only one IP address for all its functions.
1.4 Wifi Connection – Ethernet
The Wifi option proposed in Oxtopus references allows access to Ethernet RJ45.
Figure 3
Architecture Ethernet IP
A computer can connect over WiFi Oxtopus to reach other Oxtopus or other equipment as the
LNS server.
If a DHCP server provides an IP address on Ethernet, the computer do not need a fixed IP
address, its Wi-Fi connection will assign a network address automatically.