Occio Sento body verticale, Mounting Instructions, Page: 47 / 56

19
Connecting a converter from an
external manufacturer (see supple-
mentary sheet for the converter):
Connect the converter to the mains cable
as shown in the wiring diagram.
Connect the cable with the LED socket
to the converter. Observe the technical
instructions of the particular manufacturer.
Black = positive pole, white = nega-
tive pole
Guide the socket of the LED extension
cable to the outside through the hollow
ceiling/plastering box.
To connect an external Occhio
converter:
Correctly connect the converter to the
mains cable.
Guide the socket of the LED connection
cable to the outside through the hollow
ceiling/plastering box.
$
Caution:
Before fitting, disconnect all current-
carrying lines from the mains supply.
Screw the mounting plate to the hollow
ceiling box. As you do so, guide the
socket of the LED connection cable
through the opening.
Ensure that the screws finish flush with
the mounting plate.
Sento verticale flat
Remove the carbon rod from the body
(not necessary for the version with fixing
ring).
Click!
Orient the threaded
holes vertically.