19
1 Preparing Più retaining ring for panels
Should it not be possible to lower the
panel, fitting can also be carried out from
below, through the opening (provided
there is sufficient free space above).
In this case, the two halves of the
retaining ring are first passed through the
opening, and then pushed together.
Fit the retaining ring according to the
thickness of the panel:
Panel material thickness 10-16 mm:
The spheres on the inside of the
retaining ring are on top.
Panel material thickness 16-22 mm:
The spheres on the inside of the
retaining ring are at the bottom.
10-16 mm
16-22 mm
Spheres top
Spheres bottom
