Operating Y
our
Spa
16
OC Hot Tubs Owner’s Manual
LTR50001045, Rev. N
LED Lighting
Press the LIGHT button on the topside control panel to turn
the spa light on. If your spa has perimeter LED lights, they
will also light up at the same time as the spa light.
The LEDs operate in three modes:
1. Cycle:
When you continually press the LIGHT button,
the LEDs will cycle through the three main LED colors
(Red, Green, and Blue) or combinations of the three
that produce the following colors: light green, purple,
light blue, yellow, etc.
Each time you press the button, you immediately
advance to the next color in sequence or eventually a
different light pattern.
2. Flashing:
When you are cycling through all the
colors, the next time you push the LIGHT button, the
LED lights may start flashing. This is another normal
operational pattern option.
3. Fading cycle:
The next phase of operation when
you push the LIGHT button is a slow and/or fast fade
random transition from one color to the next.
• If a spa is equipped with more than 100 points of light,
the Slow Fading Cycle will flicker during a color change.
• Every air valve and water valve is equipped with 4 LED
points.
• Every jet is equipped with 2 LED points.
• Perimeter LEDs take 9 points of light.
• The waterfall takes 4 points of light.
Spas with exterior corner LED lighting generally work in the
same mode as described above. The variations in color and
patterns provide you with multiple options to suit almost
any lighting preference.
